Crude oil (after first stage separator), offloading of crude oil, water injection or refined petroleum

STUF-300FxB clamp-on. Non-intrusive ultrasonic flowmeter. The enclosure is IP65 (NEMA 4X) wall-mount type. Clamp-on is non-intrusive, pressure independent and easy to install. Ideal for produced water measurements, field verification and validation and secondary check metering.

Fuel/diesel oil consumption measurement, oil/fuel transfer, furnace/engine efficiency monitoring

STUF-300F1G and STUF-300EG. Flow-cell type flowmeters are highly accuracy. STUF-300F1B clamp-on flowmeter is a good choice if non-intrusive is required.

Lubricating oil, hydraulic oil or other machine oil applications

STUF-300F1G and STUF-300EG. Flow-cell type flowmeters. Consider STUF-300F1B clamp-on flowmeter if pipe size is over 1.5”.

Leakage detection

STUF-300F. Built-in leakage detection capabilities. If pipe is in a remote location, consider STUF-300Fn GSM/GPRS-enabled version. Solar-powered flowmeter STUF-300Sx may also be a good fit.

For all applications, if pipe size is less than 1.5”, we recommend flow-cell type flowmeter STUF-300F1G or STUF-300EG.

Note: If there is vibration on the pipe, normally a flow-cell flowmeter offers better performance than a clampon flowmeter, simply because it is not easy to clamp the transducer on a vibrating pipe tightly if the vibration is strong.